Localization¶

Working With Locales
Language Localization
- Creating Language Files
- Basic Usage
  - Replacing Parameters

Working With Locales ¶

CodeIgniter provides several tools to help you localize your application for different languages. While full localization of an application is a complex subject, it's simple to swap out strings in your application with different supported languages.

Language strings are stored in the application/Language directory, with a sub-directory for each supported language:

/application
    /Language
        /en
            app.php
        /fr
            app.php

重要

Locale detection only works for web-based requests that use the IncomingRequest class. Command-line requests will not have these features.

Configuring the Locale ¶

Every site will have a default language/locale they operate in. This can be set in Config/App.php:

public $defaultLocale = 'en';

The value can be any string that your application uses to manage text strings and other formats. It is recommended that a [BCP 47](http://www.rfc-editor.org/rfc/bcp/bcp47.txt) language code is used. This results in language codes like en-US for American English, or fr-FR, for French/France. A more readable introduction to this can be found on the [W3C's site](https://www.w3.org/International/articles/language-tags/).

The system is smart enough to fallback to more generic language codes if an exact match cannot be found. If the locale code was set to en_US and we only have language files setup for en then those will be used since nothing exists for the more specific en_US. If, however, a language directory existed at application/Language/en_US then that we be used first.

Locale Detection ¶

There are two methods supported to detect the correct locale during the request. The first is a "set and forget" method that will automatically perform content negotiation for you to determine the correct locale to use. The second method allows you to specify a segment in your routes that will be used to set the locale.

Content Negotiation ¶

You can setup content negotiation to happen automatically by setting two additional settings in Config/App. The first value tells the Request class that we do want to negotiate a locale, so simply set it to true:

public $negotiateLocale = true;

Once this is enabled, the system will automatically negotiate the correct language based upon an array of locales that you have defined in $supportLocales. If no match is found between the languages that you support, and the requested language, the first item in $supportedLocales will be used. In the following example, the en locale would be used if no match is found:

public $supportedLocales = ['en', 'es', 'fr_FR'];

In Routes ¶

The second method uses a custom placeholder to detect the desired locale and set it on the Request. The placeholder {locale} can be placed as a segment in your route. If present, the contents of the matching segment will be your locale:

$routes->get('{locale}/books', 'App\Books::index');

In this example, if the user tried to visit http://example.com/fr/books, then the locale would be set to fr, assuming it was configured as a valid locale.

注釈

If the value doesn't match a valid locale as defined in the App configuration file, the default locale will be used in it's place.

Retrieving the Current Locale ¶

The current locale can always be retrieved from the IncomingRequest object, through the getLocale() method. If your controller is extending CodeIgniter\Controller, this will be available through $this->request:

namespace App\Controllers;

class UserController extends \CodeIgniter\Controller
{
    public function index()
    {
        $locale = $this->request->getLocale();
    }
}

Alternatively, you can use the Services class to retrieve the current request:

$locale = service('request')->getLocale();

Language Localization ¶

Creating Language Files ¶

Language do not have any specific naming convention that are required. The file should be named logically to describe the type of content it holds. For example, let's say you want to create a file containing error messages. You might name it simply: Errors.php.

Within the file you would return an array, where each element in the array has a language key and the string to return:

'language_key' => 'The actual message to be shown.'

注釈

It's good practice to use a common prefix for all messages in a given file to avoid collisions with similarly named items in other files. For example, if you are creating error messages you might prefix them with error_

return [
    'errorEmailMissing'    => 'You must submit an email address',
    'errorURLMissing'      => 'You must submit a URL',
    'errorUsernameMissing' => 'You must submit a username',
];

Basic Usage ¶

You can use the lang() helper function to retrieve text from any of the language files, by passing the filename and the language key as the first paremeter, separated by a period (.). For example, to load the errorEmailMissing string from the Errors language file, you would do the following:

echo lang('Errors.errorEmailMissing');

If the requested language key doesn't exist in the file for the current locale, the string will be passed back, unchanged. In this example, it would return 'Errors.errorEmailMissing' if it didn't exist.

Replacing Parameters ¶

注釈

The following functions all require the intl extension to be loaded on your system in order to work. If the extension is not loaded, no replacement will be attempted. A great overview can be found over at Sitepoint.

You can pass an array of values to replace placeholders in the language string as the second parameter to the lang() function. This allows for very simple number translations and formatting:

// The language file, Tests.php:
return [
    "apples"      => "I have {0, number} apples.",
    "men"         => "I have {1, number} men out-performed the remaining {0, number}",
    "namedApples" => "I have {number_apples, number, integer} apples.",
];

// Displays "I have 3 apples."
echo lang('Tests.apples', [ 3 ]);

The first item in the placeholder corresponds to the index of the item in the array, if it's numerical:

// Displays "The top 23 men out-performed the remaining 20"
echo lang('Tests.men', [20, 23]);

You can also use named keys to make it easier to keep things straight, if you'd like:

// Displays "I have 3 apples."
echo lang("Tests.namedApples", ['number_apples' => 3]);

Obviously, you can do more than just number replacement. According to the official ICU docs for the underlying library, the following types of data can be replaced:

numbers - integer, currency, percent
dates - short, medium, long, full
time - short, medium, long, full
spellout - spells out numbers (i.e. 34 becomes thirty-four)
ordinal
duration

Here are a few examples:

// The language file, Tests.php
return [
    'shortTime' => 'The time is now {0, time, short}.',
    'mediumTime' => 'The time is now {0, time, medium}.',
    'longTime' => 'The time is now {0, time, long}.',
    'fullTime' => 'The time is now {0, time, full}.',
    'shortDate' => 'The date is now {0, date, short}.',
    'mediumDate' => 'The date is now {0, date, medium}.',
    'longDate' => 'The date is now {0, date, long}.',
    'fullDate' => 'The date is now {0, date, full}.',
    'spelledOut' => '34 is {0, spellout}',
    'ordinal' => 'The ordinal is {0, ordinal}',
    'duration' => 'It has been {0, duration}',
];

// Displays "The time is now 11:18 PM"
echo lang('Tests.shortTime', [time()]);
// Displays "The time is now 11:18:50 PM"
echo lang('Tests.mediumTime', [time()]);
// Displays "The time is now 11:19:09 PM CDT"
echo lang('Tests.longTime', [time()]);
// Displays "The time is now 11:19:26 PM Central Daylight Time"
echo lang('Tests.fullTime', [time()]);

// Displays "The date is now 8/14/16"
echo lang('Tests.shortDate', [time()]);
// Displays "The date is now Aug 14, 2016"
echo lang('Tests.mediumDate', [time()]);
// Displays "The date is now August 14, 2016"
echo lang('Tests.longDate', [time()]);
// Displays "The date is now Sunday, August 14, 2016"
echo lang('Tests.fullDate', [time()]);

// Displays "34 is thirty-four"
echo lang('Tests.spelledOut', [34]);

// Displays "It has been 408,676:24:35"
echo lang('Tests.ordinal', [time()]);

You should be sure to read up on the MessageFormatter class and the underlying ICU formatting to get a better idea on what capabilities it has, like permorming conditional replacement, pluralization, and more. Both of the links provided earlier will give you an excellent idea as to the options available.